I’m still alive and well just been super busy over the past few months. I’m just about to start deploying our second data center utilizing Cisco Nexus 7010, 5010, and 2248s. This time around we’ll be utilizing a Ciena 5200 DWDM platform (formerly Nortel) managed by AboveNet to provide 4 10Gbps wavelengths between our primary and secondary data center. We’ll use 2 for our SAN and 2 for our MAN over which we’ll probably utilize vPC. On top of that huge project we’re physically relocating our offices (former Data Center) so I also need to plan all that work as well.
Ethernet Routing Switch 8600 Software Release v18.104.22.168
Avaya has released software v22.214.171.124 for the Ethernet Routing Switch 8600/8800.
- Every 5 seconds, on a timer, the CPU sends the clock time to all the line cards. A timer was created each time a card came online, so when there are multiple IO cards, multiple messages were sent every 5 seconds to all cards. Eventually a lockup resulted, and when it was detected by the CPU, the chassis was reset. (wi00996291)
Please refer to the release notes for all the details.
Motorola RFS7000 WiNG v5.2.21 Software Release
You may also want to review software release 5.2.3 and 5.2.4 before deciding to check out software release 5.2.21 which was intended to resolve several MESH issues with the AP7131.
RFS Controllers with WiNG v5.2.21 can adopt and provision the following 802.11n and legacy Access Points:
Dependent Access Points:
- Legacy: AP300
Adaptive/ Independent Access Points:
- AP7131 (Including the D-mode SKUs)
You should check over the release notes for all the details.