Comments on: Juniper Junos Idle Timeout https://blog.michaelfmcnamara.com/2012/11/junos-idle-timeout/ technology, networking, virtualization and IP telephony Sat, 30 Oct 2021 18:12:53 +0000 hourly 1 https://wordpress.org/?v=6.7.2 By: Michael McNamara https://blog.michaelfmcnamara.com/2012/11/junos-idle-timeout/comment-page-1/#comment-22486 Mon, 03 Mar 2014 23:27:54 +0000 http://blog.michaelfmcnamara.com/?p=3095#comment-22486 In reply to Florian.

Thanks for the tip… didn’t realize that feature/setting was there myself.

Cheers!

]]> By: Florian https://blog.michaelfmcnamara.com/2012/11/junos-idle-timeout/comment-page-1/#comment-22449 Tue, 25 Feb 2014 10:03:30 +0000 http://blog.michaelfmcnamara.com/?p=3095#comment-22449 Nice post, thanks!

I was wondering if ‘set cli idle-timeout x’ could be used in a login script, just to make things a little simpler?! Haven’t tried it yet, though.

Btw, speaking of timeouts and stuff, I can recommend ‘set system ports console log-out-on-disconnect’

Cheers!

]]> By: Michael McNamara https://blog.michaelfmcnamara.com/2012/11/junos-idle-timeout/comment-page-1/#comment-7949 Thu, 08 Nov 2012 14:42:07 +0000 http://blog.michaelfmcnamara.com/?p=3095#comment-7949 It was mentioned to me that you can enable CLI idle-timeout just for your current session using the following commands from operational mode (not configuration mode)

admin@juinper-srx210> set cli idle-timeout 10
Idle timeout set to 10 minutes

Cheers!

]]>