Comments on: Ethernet Routing Switch 5500 NVRAM Flash memory wear https://blog.michaelfmcnamara.com/2010/03/ethernet-routing-switch-5500-nvram-flash-memory-wear/ technology, networking, virtualization and IP telephony Fri, 15 Feb 2013 14:46:48 +0000 hourly 1 https://wordpress.org/?v=6.8.3 By: erubier1985 https://blog.michaelfmcnamara.com/2010/03/ethernet-routing-switch-5500-nvram-flash-memory-wear/comment-page-1/#comment-13976 Fri, 15 Feb 2013 14:46:48 +0000 http://blog.michaelfmcnamara.com/?p=1321#comment-13976 I have trouble keeping

1. – The auto save is enabled

2. – To copy config nvram command does not save

3. – As I keep the two NVRAM

4. – As the two active NVRAM

nortel 5520-48t switch is

]]> By: AVAGO https://blog.michaelfmcnamara.com/2010/03/ethernet-routing-switch-5500-nvram-flash-memory-wear/comment-page-1/#comment-6289 Wed, 21 Mar 2012 09:24:20 +0000 http://blog.michaelfmcnamara.com/?p=1321#comment-6289 Hi Michael
Thanks for the information, I followed the instruction, but the nvram all seems good, returning with no errors, I did make block 2 active as well and try the same, again this returned with no errors, this is a strange one !
phil

]]>