Comments on: Upgrading PIM FPGA firmware on 8630GBR https://blog.michaelfmcnamara.com/2009/08/upgrading-pim-fpga-firmware-on-8630gbr/ technology, networking, virtualization and IP telephony Sat, 30 Oct 2021 17:23:26 +0000 hourly 1 https://wordpress.org/?v=6.8.3 By: Michael McNamara https://blog.michaelfmcnamara.com/2009/08/upgrading-pim-fpga-firmware-on-8630gbr/comment-page-1/#comment-18912 Thu, 31 Oct 2013 14:16:03 +0000 http://blog.michaelfmcnamara.com/?p=896#comment-18912 In reply to Paul.

Happy to hear it was helpful.

Cheers!

]]> By: Paul https://blog.michaelfmcnamara.com/2009/08/upgrading-pim-fpga-firmware-on-8630gbr/comment-page-1/#comment-18902 Wed, 30 Oct 2013 15:10:58 +0000 http://blog.michaelfmcnamara.com/?p=896#comment-18902 This old post was just what I needed. —- Thanks

]]> By: Ravi Babu https://blog.michaelfmcnamara.com/2009/08/upgrading-pim-fpga-firmware-on-8630gbr/comment-page-1/#comment-6122 Fri, 17 Feb 2012 14:13:51 +0000 http://blog.michaelfmcnamara.com/?p=896#comment-6122 This is the message we are getting on the console:
CPU5 [02/16/12 10:40:56] SW INFO dpmTrackWaitFailure: reset slot 2 – No SM Handshake from COP for 33 seconds
CPU5 [02/16/12 10:40:58] SW INFO R-Module inserted: Slot=2 Type=8648GTR, waiting to bootup…
CPU5 [02/16/12 10:41:32] SW INFO dpmTrackWaitFailure: reset slot 2 – No SM Handshake from COP for 33 seconds

]]> By: Ravi Babu https://blog.michaelfmcnamara.com/2009/08/upgrading-pim-fpga-firmware-on-8630gbr/comment-page-1/#comment-6121 Fri, 17 Feb 2012 13:51:25 +0000 http://blog.michaelfmcnamara.com/?p=896#comment-6121 Hi There;
Thank you for the valuable info.
Do you a procedure to recover a failed fpga update?
A bad file was used to update the module and it is continuously resetting, cannot find the heartbeat.

Thanks in advance

]]>