Posts tagged FACTORY RESET

Factory Reset Motorola Wireless LAN Switch

74
December 5, 2007
by Michael McNamara in

If you loose the administrator password for the Motorola Wireless LAN Switch (WS5000, WS5100) you can factory default the configuration and administrator password with the following procedure.

You’ll need to console up to the physical switch with a null serial cable. I believe the majority of Motorola (Symbol) equipment defaults to 19200-8-N-1. You need to login to the console as the username “restore” with the password of “restoreDefaultPassword”. Here’s an example;

WS5100 login: cli

User Access Verification

Username: restore
Password: restoreDefaultPasword

WARNING: This will wipe out the configuration (except license key) and
user data under "flash:/" and reboot the device
Do you want to continue? (y/n): y

After the switch reboots you’ll need to use the default administrator username and password to log into the switch. They are username “admin” and password “Symbol”. I’ve seen some cases where the password was “symbol”, the difference being the case of the first letter.

Cheers!

Factory Reset Nortel Ethernet Switch

104
November 25, 2007
by Michael McNamara in ,

There can be times when you need to factory reset a switch. This process can be accomplished through the CLI but if you’ve lost the switch password you’ll need to follow a special process. This process should work for any of the Ethernet Switches (450, 460, 470) and the Ethernet Routing Switches 2500 Series, 4500 Series, 5500 (5510, 5520, 5530) Series. There is a different process to recover lost passwords on the Ethernet Routing Switch 1600 and 8600. Please note that by factory resetting the switch you will loose all configuration settings. It will be as if it just arrived from the “factory”.

Follow these steps:

  1. Connect to the console port of the switch (9600,8,N,1)
  2. Reboot the switch.
  3. When the first line of the diagnostics tests is displayed, press CTRL-C. The system then displays a menu.
  4. Select option “i” to factory default the switch.
  5. Select option “a” to run the agent code.

Upon boot up, the switch will be in a factory default configuration.

Cheers!

Motorola Switch Password Recovery

6
November 22, 2007
by Michael McNamara in

If for whatever reason you’ve lost the Web UI or “admin” password your only recourse is to factory default the wireless switch.

To access the switch using a password recovery username and password:
1. Connect a terminal (or PC running terminal emulation software) to the serial port on the front of the switch. The switch login screen displays. Use the following CLI command for normal login process:

WS5100 login: cli

2. Enter a password recovery username of “restore” and password recovery password of “restoreDefaultPassword”.

User Access Verification
Username: restore
Password: restoreDefaultPasword
WARNING: This will wipe out the configuration (except license key) and user data under "flash:/" and reboot the device
Do you want to continue? (y/n):y

3. Press Y to delete the current configuration and reset with factory defaults.

Once the switch has complete it’s reboot you should be able to login with the default userID or “admin” and the default password of “symbol”. If you had previously backed up the configuration of the switch you could restore your old configuration.

Go to Top