Nortel has released UNIStim firmware 3.3 for their IP phones;
- 0604DCL for Phase II IP Phones (2001, 2002 & 2004),
- 0621C6P for IP Phone 2007,
- 0623C6R, 0624C6R, 0625C6R and 0627C6R for IP Phone 1110, 1120E, 1140E and 1150E respectively and
- 062AC6R for IP Phone 1210, 1220, and 1230
The enhancements available with UNIStim firmware release 3.3 for IP Phones include:
- HTTP transport for provisioning and configuration files
- DSCP provisioning precedence override
- DSCP tagging (QoS) for duplicate media stream
- DHCP provisioning information window
- New icons and colors on the IP Phone 2007
- Double-line edit boxes and drop-down boxes on selected menu items
- GXAS inactivity timer lower limit restricted to 10 seconds
- GEM firmware included in IP Phone 1100 series firmware image
- Default for LLDP changed to Enabled
- OS Diagnostics support on the IP Phone 2007
Please refer to the release notes and the product bulletin for complete details.
Cheers!
Related posts:
network architect and security professional, excited about helping folks make the most out of what technology as a whole has to offer.
Loading ...
#1 by Carl Brown on February 4, 2010 - 11:51 am
How do i change the S1address on a Nortel ip1230set. I can get in but the network config does not get me to S1
#2 by Michael McNamara on February 5, 2010 - 6:48 pm
Hi Carl,
You might want to post your question in the discussion forums.
It depends on how you’re configured the phone. If you’ve configured the phone for Full DHCP then you set the S1, S2 values via DHCP option 128. If you set the phone to Partial DHCP then you can set the S1, S2 values via the phone configuration.
Good Luck!